Pneumatic Diaphragm Pumps
-
Husky 1050 Air-Operated Diaphragm Pumps
1 inch Positive Displacement Double Diaphragm Pump
The Husky 1050 has a 1 inch (25.4 mm) connection and is available in aluminum, polypropylene, conductive polypropylene, PVDF, stainless steel and hastelloy.
The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.
The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.
-
Husky 1050 Gas-Operated Double Diaphragm Pumps
1 inch Positive Displacement Double Diaphragm Pump
AODD aluminum pump with 1 inch (25.4 mm) connection
Husky 1050 natural gas-operated double diaphragm conform to CSA/AM ANSI LC 6, certified to CSA STD T.I.L. R-14. The new line of gas-operated pumps are designed to safely operate using natural gas, in addition to compressed air, required in many remote oil field and offshore rig applications with limited traditional energy resources. Available in an aluminum pump body construction with Buna or FKM elastomers.
-
Husky 1050 UL Rated
Air-Operated Double Diaphragm Transfer Pumps
UL Approved for use in pumping gasoline and gasoline/alcohol blends up to 10% ethanol, diesel fuel, fuel oil, and lubricating oil.
Our 1 inch (25.4 mm) Husky 1050 pneumatic double diaphragm pumps feature a stall-free, low pulsation air valve which provides a smooth and rapid changeover.
UL Approved for use in pumping gasoline and gasoline/alcohol blends up to 10% ethanol, diesel fuel, fuel oil, and lubricating oil.
Typical applications include oil transfer and evacuation, fuel dispense and transfer, windshield wash solution dispense, and water and anti-freeze dispense.
-
Husky 1050HP High Pressure Air-Operated Diaphragm Pump
1 inch Air-Operated Triple Diaphragm Pump
The Husky 1050HP has a 1 inch (25.4mm) connection and is available in aluminum and stainless steel. Choose between low pressure and high pressure operating modes with Graco’s low-high pressure mode valve.
The Husky 1050HP air-operated diaphragm pump is the first pump on the market that allows users to choose between low pressure and high pressure operating modes with Graco’s low-high pressure mode valve. High pressure operation isn’t always required, so switch to the low pressure mode to reduce air consumption up to 50%. These features combined with the quality and reliability of our standard Husky diaphragm pump design; make this one of the most unique high pressure diaphragm pumps on the market.
-
Husky 15120 Air-Operated Diaphragm Pumps
1.5 inch Positive Displacement Double Diaphragm Pump
The Husky 15120 has a 1.5 inch (38.1 mm) connection and is available in polypropylene and PVDF.
The Husky 15120 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.
The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.
-
Husky 1590 Air-Operated Diaphragm Pumps
1,5 inch Positive Displacement Double Diaphragm Pump
The Husky 1590 has a 1,5 inch (38.1 mm) connection and is available in aluminum, stainless steel and polypropylene.
The Husky 1590 air-operated diaphragm pump features a patented, high-reliability closed center air valve that is online serviceable and an epoxy-coated air section for tough environmental conditions.
-
Husky 205 Air-Operated Double Diaphragm Pumps
0.25 inch Positive Displacement Double Diaphragm Pump
The Husky 205 has a 1/4 inch (6.3 mm) connection and is available in polypropylene, groundable acetal and PVDF
The Husky 205 air-operated diaphragm pump features spring check valves for superior priming in any mounting configuration.
- 1/4-in (6.35 mm) end-porting double diaphragm pump
- Spring check valves for superior priming in any mounting configuration
- Remote control option using an external controller
-
Husky 2150 Air-Operated Diaphragm Pumps
2 inch Positive Displacement Double Diaphragm Pump
The Husky 2150 has a 2 inch (50.8 mm) connection and is available in polypropylene, aluminum, SST and iron.
The Husky 2150 air operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.
- 2 in (51 mm) ANSI end-porting
- Fluid flow up to 150 gpm (568 lpm)
- Fluid pressure to 120 psi (8.4 bar, 0.84 MPa)
- Lube-free operation
- Epoxy-coated air section for tough environmental conditions
- Available in aluminum, 316 stainless steel, ductile iron and polypropylene
-
Husky 2200 Air-Operated Diaphragm Pumps
2 inch Positive Displacement Double Diaphragm Pump
The Husky 2200 has a 2 inch (50.8 mm) connection and is available in polypropylene and PVDF.
The Husky 2200 air-operated diaphragm pump features a single piece polypropylene center section for increased reliability and chemical compatibility, plus a patented, high-reliability modular air valve that is online serviceable.
This diaphragm pump is designed with a reinforced frame for improved reliability and will help to eliminate fluid leakage.
-
Husky 307 Air-Operated Double Diaphragm Pumps
3/8 inch Positive Displacement Double Diaphragm Pump
The Husky 307 has a 3/8 inch (9.52 mm) connection and is available in polypropylene and groundable acetal
The Husky 307 air-operated diaphragm pump features a stall-free low pulsation air valve that provides a smooth and rapid changeover.
- 3/8 in (9.52 mm) end porting
- Fully-groundable acetal model
- Delivery up to 7 gpm (26.5 lpm)
- Easy-to-service air valve and ball checks
-
Husky 3300 Air-Operated Diaphragm Pumps
3 inch Positive Displacement Double Diaphragm Pump
The Husky 3300 has a 3 inch (76.2 mm) connection and is available in aluminum, polypropylene and stainless steel
The Husky 3300 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.
- Expanded material offering to handle numerous applications
- Flow rates up to 300 gpm (1,135 lpm)
- Modular stall-resistant air valve design
- Complete 3 inch family of diaphragm pumps available in aluminum or polypropylene center sections
- Heavy-duty construction
- Faster change over with spring loaded pilot valves
The one-piece center section eliminates leaks and reduces maintenance on the Husky pumps when compared to other diaphragm pumps.
-
Husky 515 Air-Operated Diaphragm Pumps
½ inch Positive Displacement Double Diaphragm Pump
The Husky 515 has a ½ inch (12.7 mm) connection and is available in polypropylene, acetal and PVDF
The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.
The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.
- Fully-groundable acetal model
- Delivery up to 15 gpm (56.7 lpm)
- Easy-to-service air valve and ball checks
- Reliable air valve for years of dependable performance