Dispensit 1052 and 1053 Valves

Precision Dispense Valve

Positive displacement metering rod valves for low to high viscosity materials

The Model 1052 & 1053 rod positive displacement valves are designed for volumetric shot-to-shot (1052) or bead (1053) dispensing of a wide variety of materials.

  • For low to high viscosity materials with various wetted component configurations
    for abrasive filled, or corrosive materials
  • 1052 is a pneumatically-controlled valve with micrometer adjustable dispense volumes
    for accurate, repeatable shot dispensing
  • 1053 is a servo-driven valve for programmable, precise shot or bead dispensing
  • Pneumatic and electronic controls can be integrated for automated applications

Description

  • Positive displacement metering
  • Wide array of wetted components

Dispensit 1053-10C

Maximum Ambient Temperature
110°F
Maximum Operating Temp
300°F
Maximum Outlet Fluid Working Pressure
2000 psi
Maximum Air Working Pressure
100 psi
Minimum Air Working Pressure
70 psi
Maximum Material Inlet Pressure
Metal Sleeves: 1200 psi
Plastic Sleeves: 400 psi
2.8 MPa, 28 bar
Supplied Air Requirements.
1 to 3 cfm at 80 psi to 100 psi
Shot Size Range (depending on metering rods selected)
0.002 cc to 3.150 cc
Maximum Cycle Rate (application dependent, heat required) .
Up to 15 cycles per minute (with standard Graco motor)
Dimensions (H x L x W), height to end of material inlet
1 in.: 14.83 x 6.23 x 2.91 in.
2 in.: 17.85 x 6.23 x 2.91 in
453 x 158 x 74 mm

Graco-supplied Feed System Assemblies (depends on selected options):

Smallest: 22.5 x 10 x 4 in.
572 x 254 x 102 mm
Largest: 60 x 28 x 19 in.
(1524 x 711 x 483 mm
Weight
Metering Valve: 3 – 5 lb
Wetted Parts
Metering Valve: Hardened steel, 303/304, 404, UHMWPE, Tungsten, carbide, fluoroelastomer, EPDM, PTFE, Acetal. Graco-supplied Feed System Hoses and Fittings: Mild steel, 303/304, PTFE, buna, polyethylene, polypropylene. Graco-supplied Tanks: Polyethylene, 303/304, mild steel

Dispensit 1052

Maximum Ambient Temperature
110°F
Maximum Operating Temp
150°F
Maximum Outlet Fluid Working Pressure
2000 psi
Maximum Air Working Pressure
100 psi
Minimum Air Working Pressure
70 psi
Maximum Material Inlet Pressure
Metal Sleeves: 1200 psi
Plastic Sleeves: 400 psi
2.8 MPa, 28 bar
Supplied Air Requirements.
1 to 3 cfm at 80 psi to 100 psi
Shot Size Range (depending on metering rods selected)
0.002 cc to 3.600 cc
Maximum Cycle Rate (application dependent, heat required) .
Up to 60 cycles per minute
Dimensions (H x L x W), height to end of material inlet
16.13 x 5.52 x 2.75 in.

Graco-supplied Feed System Assemblies (depends on selected options):

Smallest: 22.5 x 10 x 4 in.
572 x 254 x 102 mm
Largest: 60 x 28 x 19 in.
(1524 x 711 x 483 mm
Weight
Metering Valve: 4 – 5 lb
Wetted Parts
Metering Valve: Hardened steel, 303/304, 404, UHMWPE, Tungsten, carbide, fluoroelastomer, EPDM, PTFE, Acetal. Graco-supplied Feed System Hoses and Fittings: Mild steel, 303/304, PTFE, buna, polyethylene, polypropylene. Graco-supplied Tanks: Polyethylene, 303/304, mild steel

Dispensit 1053-10B

Maximum Ambient Temperature
110°F
Maximum Operating Temp
150°F
Maximum Outlet Fluid Working Pressure
2000 psi
Maximum Air Working Pressure
100 psi
Minimum Air Working Pressure
70 psi
Maximum Material Inlet Pressure
Metal Sleeves: 1200 psi
Plastic Sleeves: 400 psi
2.8 MPa, 28 bar
Supplied Air Requirements.
1 to 3 cfm at 80 psi to 100 psi
Shot Size Range (depending on metering rods selected)
0.002 cc to 3.150 cc
Maximum Cycle Rate (application dependent, heat required) .
Up to 15 cycles per minute (with standard Graco motor)
Dimensions (H x L x W), height to end of material inlet
1 in.: 14.83 x 6.23 x 2.91 in.
2 in.: 17.85 x 6.23 x 2.91 in
453 x 158 x 74 mm

Graco-supplied Feed System Assemblies (depends on selected options):

Smallest: 22.5 x 10 x 4 in.
572 x 254 x 102 mm
Largest: 60 x 28 x 19 in.
(1524 x 711 x 483 mm
Weight
Metering Valve: 3 – 5 lb
Wetted Parts
Metering Valve: Hardened steel, 303/304, 404, UHMWPE, Tungsten, carbide, fluoroelastomer, EPDM, PTFE, Acetal. Graco-supplied Feed System Hoses and Fittings: Mild steel, 303/304, PTFE, buna, polyethylene, polypropylene. Graco-supplied Tanks: Polyethylene, 303/304, mild steel