Horizon Fluid Management Systems

Electronic Fluid Management System

Bulk dispensing to multiple service bays

 

  • Allows multiple technicians to dispense simultaneously
  • Easily configured and expandable for any facility
  • Increases technician productivity
  • Password-protected to prevent unauthorized dispensing
  • Tracks inventory levels and alerts operators to low inventory conditions to minimize out-of-stock situations

Horizon

System Specifications
40 maximum
Control Modules in a system (1 Master only, plus 39 Slave)
40 maximum
Keypads in a system (1 keypad per Control Module; Administrators Keypad must be connected to the Master Control Module)
240 maximum
Solenoids in a system (40 Control Modules, 6 ports each)
240 maximum
Meters in a system (40 Control Modules, 6 ports each)
10 maximum
Fluids supported by a system
99 maximum
Dispense Areas (reel banks)
100 maximum
Operator Names/PIN numbers
668 maximum
Dispense Records stored
12 maximum
Simultaneous Dispenses (same and/or different fluids)
12 maximum
Jobs Waiting in Queue
1 maximum
Printer per system (must be connected to Master Control Module) OR Attached Computer per system (must be connected to Master Control Module)
Control Module Ports
6
Solenoid Ports per Control Module
6
Pulse Meter Ports per Control Module
1
Port for Keypad per Control Module
1
Port for printer or computer per Master Control Module
1
Bar code reader per control module
Voltage Input
110 Volts AC, 50/60 Hz, 2 amps maximum draw
220 Volts AC, 50/60 Hz, 1 amp maximum draw
Environment
Operating Temperature Range
40–140°F ambient
Humidity Range
0–95% non-condensing
Preset or Free-flow Limits
999.9 Units
Maximum Preset or free-flow dispense
0.5 Units
Minimum Preset dispense
Dispense Units of Measure
liters, quarts, gallons or pints (configurable for each fluid)
Inventory Units of Measure
liters or gallons (dependent upon dispense units chosen)
Maximum Cable Lengths
From Keypad to Control Module
50 ft
From Solenoid to Control Module
50 ft
From Pulse Meter to Control Module
50 ft
From Printer or Computer to Master Control Module
50 ft
From one end of the Control Module Network to the other end (daisy-chained)
2000 ft