Husky 2150 Air-Operated Diaphragm Pumps

2 inch Positive Displacement Double Diaphragm Pump

The Husky 2150 has a 2 inch (50.8 mm) connection and is available in polypropylene, aluminum, SST and iron.

The Husky 2150 air operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

 

  • 2 in (51 mm) ANSI end-porting
  • Fluid flow up to 150 gpm (568 lpm)
  • Fluid pressure to 120 psi (8.4 bar, 0.84 MPa)
  • Lube-free operation
  • Epoxy-coated air section for tough environmental conditions
  • Available in aluminum, 316 stainless steel, ductile iron and polypropylene

Description

Benefits of the Husky 2150 double diaphragm pumps

  • Overall improved efficiency (up to 40% more efficient)
  • Highest fluid flow rate in its class
  • Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps
  • Expanded material offering to handle endless applications
  • Fewer parts than industry peers, the complete air valve is externally accessible so it can be serviced fast and easy without removing the diaphragm pump

 

Overview
Maximum fluid flow
Maximum Fluid Discharge Pressure
120 psi (8 bars, 0.8 MPa)
Maximum size pumpable solids
Fluid displacement per cycle

Husky 2150 Performance

Husky 2150 Air-Operated Diaphragm Pump

Maximum fluid working pressure
120 psi
Air pressure operating range
20-120 psi
Maximum air consumption
175 scfm (see instruction manual chart)
Air consumption at 70 psi (0.48 MPa, 4.8 bar)/60 gpm
60 scfm (see instruction manual chart)
Maximum free-flow delivery
150 gpm
Maximum pump speed
145 cpm
Gallons (liters) per cycle
1.03 gal
Maximum suction lift
18 ft wet or dry
Maximum size pumpable solids
1/4 in
Maximum noise level* at 100 psi (7.0 bar, 0.7 MPa) and 50 cpm
90 dBa
Sound power level, sound power measured per ISO Standard 9216.
103 dBa
Noise level at 70 psi (4.8 bar, 0.48 MPa) and 50 cpm, noise levels measured with the pump mounted on the floor using Rubber Foot Kit 236452.
85 dBa
Maximum Operating Temperature
Models with PTFE diaphragms
200°F
Models with other diaphragms
150°F
Air inlet size
1/2 npt(f)
Fluid inlet size
2 in npt(f)
Fluid outlet size
2 in npt(f)
Wetted parts vary by model. See manual.
Non-wetted external parts
Aluminum, 302 and 316 stainless steel, polyester (labels)
Weight
Aluminum pumps
58 lb
Stainless steel pumps with aluminum center section
111 lb
Ductile iron pumps with stainless steel center section
130 lb
Stainless steel pumps with stainless steel center section
134 lb

Husky 2150 Air-Operated Diaphragm Pump

Maximum fluid working pressure
120 psi
Air pressure operating range
20-120 psi
Maximum air consumption
175 scfm
Air consumption
60 scfm at 70 psi, 60 gpm
Maximum free-flow delivery
150 gpm
Maximum pump speed
145 cpm
Gallons (liters) per cycle
1.03 gal
Maximum suction lift
18 ft wet or dry
Maximum size pumpable solids
1/4 in
Maximum noise level* at 100 psi (7.0 bar, 0.7 MPa) and 50 cpm
90 dBa
Sound power level*
103 dBa
Noise level* at 70 psi (4.8 bar, 0.48 MPa) and 50 cpm
85 dBa
Maximum Operating Temperature
150°F
Air inlet size
1/2 npt(f)
Fluid inlet size
2 in Raised Face Flange
Fluid outlet size
2 in Raised Face Flange
Wetted parts vary by model. See manual.
Non-wetted external parts
Aluminum, 302 and 316 stainless steel, polyester (labels)
Weight
Polypropylene pumps with aluminum center section
49 lb
PVDF pumps with aluminum center section
68 lb
Polypropylene pumps with stainless steel center section
71 lb
PVDF pumps with stainless steel center section
90 lb
® and Santoprene ® are registered trademarks of the Monsanto Co. Loctite ® is a registered trademark of the Loctite corporation. * Noise levels measured with the pump mounted on the floor using Rubber Foot Kit 236452. Sound power measured per ISO Standard 9216.