LD Series Pumps and Packages

Air Operated Piston Pump

Discover the Value of Graco LD Series Pumps

Stay ahead of the competition with LD Series Pumps. These affordable and full featured pumps are designed for lower volume applications and are available in 3:1 and 5:1 for oil and 50:1 for grease. These pumps are fine-tuned for a compact, flexible and still incredibly durable solution.

You work hard to provide good service and that’s exactly what we had in mind when we engineered the LD Series Packages. Whether your delivery is in your backyard or 50 miles away, LD Packages reliably do the job. You can count on Graco equipment to reduce repair hours so you can concentrate on deliveries and bring more to your bottom line.

All LD package  meters come standard  with trigger guard, hose boot and automatic nozzel.

Description

  • Three Inch Air Motor – Provides more power to create better flow.
  • NXT Air Valve – Designed to reduce icing in continuous use applications and uses less air than competitive pumps for better efficiency. Easy to repair or replace without tearing down internal pump components for less downtime.
  • Modular Air Valve – Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.
  • Built-In Thermal Relief and Inlet Strainer – Built-in thermal relief protects your equipment from thermal expansion without the need to buy and install an additional kit. Inlet strainer (oil only) is built-in to protect pump from containments that can damage your pump.

LD Series Oil Pump

Maximum Fluid Working Pressure
750 psi
Fluid Pressure Ratio
3:1 or 5:1
Suction Lift (feet of oil)
10
Air Operation Range
20 to 150 psi
Recommended Air Pressure for Optimum Pump Life
Less than 125 psi
Air Consumption (at 100 psi)
See Performance Curves in instruction manual 3A1334
Cycles per gallon (liter)
3:1 – 29 cycles/gal, 5:1 – 37 cycles/gal
Maximum Recommended Pump Speed
3:1 – 120 cycles/min, 5:1 – 180 cycles/min
Recommended Speed for Optimum Pump Life
75 cycles/min and lower, 3:1 – 2.6 gal/min, 5:1 – 2 gal/min
Wetted parts
zinc plated carbon, steel, aluminum, nitrile, polyurethane, nickel plated aluminum
Sound Pressure Level, calculated at a distance of 1 meter from measurements taken per ISO 9614–2 @ 100 psi air pressure (6.89 bar, 0.68 MPa) and 20 cycles per minutes. Muffler 112933 can be ordered separately for reduced sound levels.
72.9 dB(a)
Sound Power Level, measured per ISO 9614–2 at 100 psi air pressure (6.89 bar, 0.68 MPa) and 20 cycles per minute. Muffler 112933 can be ordered separately for reduced sound levels.
82.0 dB(a)
Performance Curve
See charts in instruction manual 3A1334

LD Series Grease Models

Maximum Fluid Working Pressure
7500 psi
Fluid Pressure Ratio
50:1
Air Operation Range
20 to 150 psi
Air Consumption (at 100 psi)
See performance curve in instruction manual 3A1334
Pump Cycles per pound (cycles per kg)
47 cycle/lb
Maximum Recommended Pump Speed
120 cycles/min
Recommended Speed for Optimum Pump Life
60 cycles/min of lower flow rate, 1.3 lb/min
Wetted parts
steel, brass, nitrile rubber, polyurethane, UHMWPE, acetal
Sound Pressure Level, calculated at a distance of 1 meter from measurements taken per ISO 9614–2 @ 100 psi air pressure (6.89 bar, 0.68 MPa) and 20 cycles per minutes. Muffler 112933 can be ordered separately for reduced sound levels.
72.9 dB(a)
Sound Power Level, measured per ISO 9614–2 at 100 psi air pressure (6.89 bar, 0.68 MPa) and 20 cycles per minute. Muffler 112933 can be ordered separately for reduced sound levels.
82.0 dB(a)
Performance Curve
See Chart in instruction manual 3A1334
Approximate Weight
35 lb drum – 11.2 lb, 120 lb drum – 15.0 lb, 400 lb drum – 170.0 lb